A Member of GAO Group - Celebrating 15 Years of Innovation
  Home|  FAQ|  Shipping|  About Us|  Contact Us|  News|  Career
   
  

Product 5/21

Previous
Return to the Product List
Next

Handheld 2 Channel Digital Oscilloscope w/DMM
GAO A0110007

 Contact Us

Overview – Handheld 2 Channel Digital Oscilloscope w/DMM

This handheld digital oscilloscope has all of the functionality of a digital multimeter (DMM), such as measurements for voltage, current, resistance, capacitance, and diode and continuity check. It can be used both as a DMM and a professional oscilloscope. It provides multi-signal measurement and inspection. It is durably designed for operation even in harsh industrial environments. This handheld digital oscilloscope is an ideal tool for engineers and technicians in the performance of complex measurements and troubleshooting during on-site inspection.

Key Features – Handheld 2 Channel Digital Oscilloscope w/DMM

  • Cost-efficient and light weight
  • Multi-language display
  • Up to 6 hours operation from a single battery charge
  • Flexible control software

Technical Specifications – Handheld 2 Channel Digital Oscilloscope w/DMM


Oscilloscope
Model
A0110007
Bandwidth
60 MHz
Sample Rate (Real time)
250 MS/s
Horizontal Scale(S/div)
5 ns/div to 100 s/div, step by 1～2～5
Rise time(at input, typical)
≤ 5.8 ns
Display
3.7 inch color display with TFT panel (640 × 480 pixels, 65535 colors)
Channels
Dual
Record Length
Max. 6000 points on each channel
Interpolation
(sin x)/x
Probe Attenuation Factor
1X, 10X, 100X, 1000X
Input Coupling
DC, AC, GND
DC Accuracy(Average)
Average>16: ± (5% reading + 0.05 div) for ΔV
Vertical Sensitivity
5 mV/div to 5 V/div (at input)
Vertical Resolution (A/D)
8 bit(2 channels simultaneously)
Max. Input Voltage
400 V (PK-PK) (DC + AC PK-PK, 1 MΩ input impedance, Probe attenuation 10:1) CAT II
Trigger Type
Edge, Video, Alternate
Trigger Mode
Auto, Normal, Single
Trigger level
±6 divisions from screen center
Acquisition Modes
Sample, Peak Detect and Average
DC Gain Accuracy
±3%
Automatic Measurement
Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Preshoot, Risetime, Falltime, +Width, -Width, +Duty, -Duty, Delay A→B , Delay A→B
Waveform Math
＋, －, ×, ÷, FFT
Waveform Storage
4 waveforms
Lissajou's Figure
Bandwidth
60 MHz
Phase Difference
±3 degrees
Communication Interface
USB
Power Supply
100 V to 240 V AC, 50/60 Hz
Li-ion Battery
7.4 V, 6 hours operation
Multimeter Specifications
Full scale reading
3 3/4 digits (Max.4000 count)
Diode: 0 V to 1.5 V
Input Impedance
10 MΩ
On/Off measurement: <50 (±30) beeping
Capacitance
51.2 nF to 100 uF: ±(3% ± 3 digit)
Voltage
VDC: 400 mV, 4 V, 400 V: ± (1 ± 1 digit) Max. input: DC 1000 V, VAC: 4 V,40 V, 400 V: ±(1 ± 3 digit)
Frequency: 40 Hz to 400 Hz, Max: input: AC 750 V (virtual value)
Current
DCA: 40 mA, 400 mA: ± (1.5% ± 1 digit) 10 A: ± (3% ± 3 digit)
DAA: 40 mA ± (1.5% ± 3 digit) 400 mA:± (2 ± 1 digit) 10 A: ± (3% ± 3 digit)
Impedance
400 Ω: ± (1% ± 3 digit), 40 Ω
General Specifications
Interface
USB Data Cable (Transfer waveform data to a PC)
Power
Supply: 100 V to 240 V AC, 50/60 Hz
DC input: 8.5 VDC, 1500 mA
Battery: 6 hours
Dimension
180 mm × 115 mm × 40 mm
Weight
645 g

Product Comparison – Handheld 2 Channel Digital Oscilloscope w/DMM


Model
Channels
Sample Rate
Bandwidth
A0110002
2
100 MSa/s
20 MHz
A0110007
2
250 MSa/s
60 MHz

Product 5/21

Previous
Return to the Product List
Next
 | Home | FAQ | Shipping Info | About Us |  Site Map | News | 
Copyright © 2005-2011 GAO Instruments Inc.
GAO INSTRUMENTS specializes in
E1 BER Tester, ADSL Tester, CATV Meter, CATV Instrument
Logic Analyzer, Telecom Tester and Analyzer, E1 Service Tester, Datacom Tester
IPTV Tester, Portable Digital Oscilloscope, Desktop Digital Oscilloscope, Handheld Oscilloscope.
USB PC Based Oscilloscope, Signal Level Meter, Signal Generator, Fiber Optic Instrument
Data Acquisition Card/Module, Handheld TDR, Optical Power Meter, Handheld OTDR