USB PC Based Oscilloscope (512K)
A0130010

A0130010 USB PC Based Oscilloscope (512K) combines a high performance PC based digital storage oscilloscope (DSO), four 8 bit channels, 80MHz bandwidth, 250MSa/s sample rate, and 512K sample memeory buffer with an sixteen 250MHz channels' logic analyzer and an FFT spectrum analyzer. By connecting with your PC's parallel or USB port, A0130010 USB PC Based Oscilloscope will provide a low cost but ultimate test and measurement solution through its professional software which have free upgrades via the web.

We have different models to meet your requirement. Please read our Product Comparison or Contact Us for more information.

Features - USB PC Based Oscilloscope (512K)

• Four 8-bit, 80 MHz, 250 MSa/s analog digitizing channels
• Sixteen250 MHz logic analyzer channels.
• Innovative cross triggering: Logic analyzer channels can trigger the analog channels and vice versa.
• Deep 512K sample data acquisition buffers on each channel.
• Continuously variable pre-/post-trigger view.
• Variable threshold voltage on logic analyzer channels
• External clock input.
• Very fast screen update rates. High impedance probes, logic analyzer pod, chips, wires and software all include - no hidden costs.
• Ruggedized inputs.
• 20 GHz repetitive mode sample rate.
• 8K FFT fast display spectrum from 1.22 MHz to 97.6 MHz the gain type is logarithm, power spectrum, and magnitude.
• Freesoftware upgrades via web sites.
• Connect to Notebook, Laptop or Desktop PC via parallel port or USB Port.
• Precision 100 MHz Frequency Counter, up to 7 digital resolution @128K memory for each analog channel.

Twice the measurement Power at 1/5 the Price

GAO USB PC Based Oscilloscope integrates two (or four) 250 MSa/s single-shot digitizers with a 250 MHz, 8 (or 16) channel logic analyzer and FFT Spectrum in a single low cost instruments. It slashes the cost of capturing and analyzing signals on up to 50 MHz microprocessors, logic families, and analog circuits on systems. GAO USB PC Based Oscilloscope costs about 1/5 the price of other PC based or stand-alone digital storage oscilloscopes.

Cross Triggering for Mixed Signal Analyzer

GAO USB PC Based Oscilloscope contains fully synchronized cross triggering. You can capture and display analog events that affect your digital circuits, or vice-versa, and correlate the two to identity cause and effect relationships. The logic analyzer can act as 8 (or 16) channel pattern trigger input for the oscilloscope, or the oscilloscope can trigger the logic analyzer when an analog signal crosses threshold. The display screen shows the full 256K/512K/1Mega sample deep data buffers for both the analog waveform and the digital data pattern. All-channel zoom expansion and cursors identify synchronous events on different channels.

Portability

GAO USB PC Based Oscilloscope connects via the parallel port or USB port. You run the oscilloscope with any laptop or desktop PC. The ultra-compact size allows you take it with you any where you go.

The PC Based Digital Oscilloscope Advantage

Use of your PC for processing, display, and data storage saves your time and money. Make measurements in your first half-hour due to the easy installation and simple single keystroke operation-no multilayer menus to stumble through. The instrument responds instantly, like an analog oscilloscope, to setting changes. Since the instrument resides in your PC, so does the data-no programming required for data transfers. You can store an unlimited number of waveforms and timing patterns to floppy or hard disk for later recall. Named set up panels can also be saved and recalled from disk.

Specification - USB PC Based Oscilloscope (512K)

GAO USB PC Based Oscilloscope Product Comparison

"Nice selection on the testing tools. I'm also glad I didn't have to go through all the emails and payment methods to pay for something I want. I will definitely buy again."

Pius Stephanson, USA