Overview – Radio Frequency (RF) Spectrum Analyzer
This radio frequency spectrum analyzer is used to install, test, troubleshoot, analyze and optimize
wireless networks in telecommunications, broadcasting and CATV. It uses locked–phase local and all–
digitized medium frequency processing technologies. All RBW/VBW filters and medium frequency/video detectors
are digital. Its internal non–volatile memory can store 200 measurement data, which can be downloaded via
its RS232 interface. The radio frequency spectrum analyzer is equipped with a 6-inch VGA TFT color LCD
screen.
Technical Specifications – Radio Frequency (RF) Spectrum Analyzer
Frequency Range
| 9 kHz to 3 GHz
|
Frequency Readout Accuracy
| ±(frequency
reading × reference frequency error + 5% span +25% resolution bandwidth)
|
Resolution
Bandwidth
| 100 Hz to 1 MHz (1,3 steps)
|
Bandwidth Accuracy
|
± 25% (1 MHz) ± 10% (<1 MHz)
|
Bandwidth Switch Uncertainty
| < 0.5
dB
|
Video Bandwidth
| 10 Hz to 1 MHz (1,3steps)
|
SSB
Phase Noise
| <-75 dBc/Hz (at 30 kHz,1 G)
<-110 dBc/Hz (at 1 MHz,1 G)
|
Amplitude Range
| 20 dBm to Noise Level
|
Max. Safety
Level
| CW 27 dBm DC Level ± 20 V
|
Display Average Noise Level
| 100 kHz to 500 kHz: < -95 dBm (typical -100 dBm)
>500 kHz: <-107 dBm (typical -115
dBm )
|
Combined Level Uncertainty
| ± 3 dB (reference level to 60 dBc
lower than reference level, typical ± 1 dB )
|
Spurius Response
| < -45
dBc
|
Residual Response
| < -80 dBm
|
Frequency
Response
| ±1.2 dB
|
Input Attenuator
| 0 dB to 30 dB (10 dB
step)
|
Input Port
| N female, 50 Ω, Input SWR 1.5
|
Digital Port
| RS232
|
Power Consumption
| < 15 W (not including recharging capacitance)
< 28 W (including recharging
capacitance)
|
Operating Time
| About 4 h with fully-charged battery
|
Mtbf
| >3500 h
|
Weight
| 3 kg
|
Dimensions Circa
| 175 mm x 280 mm x 80 mm
|
Environment
Adaptation
| Conforms to third-level equipment standards in GJB3947–2000
|
