September 9th, 2010
Toronto, Canada – GAO Instruments has released a fiber optic identifier which is ideal for use in the installation and maintenance of telecommunication and CATV systems. The identifier detects signal frequency tones of 270Hz, 1kHz and 2kHz. It efficiently and accurately identifies the traffic direction and frequency tone of a signal in an optical fiber and indicates status through LEDs.
This high performance optical fiber identifier, model A0640002, features low bending loss, offers an easy-to-replace adaptor and displays three levels of signal intensity. It identifies optical signals at wavelengths from 900 to 1650nm and does not require opening a fiber at a splice point for identification. In addition, an audible tone can be heard when destructive detection is present on the fiber during testing.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: Fiber Optic Identifier
Posted in GAO Instruments News | No Comments »
September 7th, 2010
Toronto, Canada – GAO Instruments recommends an Optical Power Meter with a single-chip microprocessor. It is commonly deployed in the construction and maintenance of fiber optics communication systems and fiber optic CATV. It is used to test continuous optical signals.
This optical power meter, model A0300034, automatically detects frequencies of 270Hz, 1kHz, and 2kHz. It boasts a built-in long wavelength camera probe and a newly-designed electric rubber switch. The portable optical power meter offers simple and reliable operation and is suitable for various environments. It features automatic range switch, reset, power off and multi-wavelength measurement.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: multi-functional optical power meter
Posted in GAO Instruments News | No Comments »
September 5th, 2010
Toronto, Canada – GAO Instruments recommends this portable and multi-functional ADSL 2+ tester supporting tests on ADSL 2+ (G.992.5), ADSL 2 (G.992.3) and RE-ADSL (Annex L) lines. It is also downward compatible with ADSL (G.DMT, G.Lite, T1.43) line standards. The portable tester is designed for ADSL technicians and engineers for field use and is an ideal solution for the installation and maintenance of telecommunication systems. It operates as an ADSL Modem and conducts Bridge, PPPoE, PPPoA, MER, IPoA regulation to perform ISP simulation login and verify operational performance of the terminal equipment. The tester can also be used as a digital multi-meter to test subscriber telephone connectivity and line parameters.
This rugged tester, model A0300031, conducts upstream and downstream rate measurement, error count, modem simulation, and ping test. To protect the customer’s investment, it provides upgradable software via Ethernet or USB interface. It is equipped with a 4.3 inch colorful display screen with backlight and smart navigation menu for convenient operation. The tester features real-time display of data rate and flux and boasts a large storage volume for convenient storage of test settings and results. This powerful tester operates under the Windows™ CE platform and is capable of Web site browsing. The ADSL2+ tester works continuously for more than 3.5 hours using its rechargable built-in Li-ion battery or the unit can be operated using the external charger.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: ADSL Modem, ADSL2+ Tester
Posted in GAO Instruments News | No Comments »
September 3rd, 2010
Toronto, Canada – GAO Instruments has released its ADSL 2+ tester featuring simple menu operation It tests physical layer parameters including current and maximum rate, noise margin, attenuation and output power. The tester also has the ability to view IP addresses and locate telephone line faults.
This compact ADSL2+ tester, model A0300019, incorporates xDSL testing, PPPoE testing, DMM functions and modem emulation. When operating as a digital multi-meter (DMM), it performs loop resistance, capacitance, insulation resistance and voltage measurements. The portable ADSL2+ tester has both auto and multiple modem modes and can store up to 99 groups of data. It has a high definition backlit LED screen for clear display and an auto power-off function will kicks within a few minutes inactivity.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: ADSL2+ Tester, Portable xDSL Tester, Testing
Posted in GAO Instruments News | No Comments »
September 1st, 2010
Toronto, Canada – GAO Instruments has released its optical light source which is suited for the installation, construction and maintenance of fiber optic telecommunications and CATV systems. This optical light source provides 1 to 4 wavelengths to meet specific requirements. It features highly stable output power and adjustable frequency.
This portable optical light source, model A0630006, offers CW modulation frequencies of 2Hz, 270Hz, 1kHz and 2kHz. It provides 1310nm and 1550nm wavelengths for the single mode fiber measurement or 850/1300nm wavelength for multimode fiber. Equipped with a large backlit LCD, the light source is easy to use. This optical light source has a compact size and long operation time and is an ideal solution for use in the field. .
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: Optical Light Source
Posted in GAO Instruments News | No Comments »
August 30th, 2010
Toronto, Canada – GAO Instruments has rolled out its super signal level meter used in the CATV industry. This super level meter measures and displays the amplitude at a specific frequency or any carrier defined by the user. This super signal level meter tests analogue channels, digital channels (QAM) and FM channels efficiently and effectively. It also performs C/N measurement, voltmeter functions, spectrum analysis, auto testing, data logging and return path measurements.
This super signal level meter, model A0500003, operates within a broad frequency range of 45MHz to 870MHz or 5MHz to 870MHz. The peak-hold level measurement function in the LEVEL and SPECTRUM modes enables the meter to detect the occasional disturbance. The meter features a compact size, automatic timing measurements and quick charging. It is an ideal and invaluable tool for CATV signal testing.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: CATV Signal Measurement, Super Signal Level Meter
Posted in GAO Instruments News | No Comments »
August 25th, 2010
Toronto, Canada – GAO Instruments has added a dual-channel, low bandwidth digital oscilloscope to its product collection. This portable digital oscilloscope is an ideal tool for engineers and technicians who need to perform complex measurements in such areas as sciences, medicine, engineering, telecommunications and similar industries.
This easy-to-use digital oscilloscope, model A0120003, features mathematical functions, FFT spectrum analysis, automatic parameter measurements and option configurations like time display. It boasts high/low pass, band pass and band-stop digital filters. The high performance oscilloscope measures Vpp, Vamp, Vrms, Vmax, Vmin, Vtop, Vbase, Vavg, Freq, Period, Risetime, Fulltime. What’s more, this multi-function digital oscilloscope captures signals triggered with edge, pulse and video and analyzes synchronized signals with a delay scanner.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: multi-function digital oscilloscope bandwidth
Posted in GAO Instruments News | No Comments »
August 23rd, 2010
Toronto, Canada – GAO Instruments is offering its high performance cable fault locator using TDR technology. It is intended for use in communication maintenance and integrated cabling. The locator performs fault distance location, pulse testing, cable line fault testing, wave shape comparison and data record testing. It also tests the line for breaks and shorts, circuit faults on twisted-pair cable, data cable, electric power cable and coaxial cable.
This accurate cable fault locator, model A0300025, automatically locates fault distance without manual intervention. The measurement range is from 1 to 6000m; calibrated measurement distances are 50m, 100m, 200m, 800m, 1600m, 3000m and 6000m. The locator features a large LCD screen, simple operation, automatic resolution test, low voltage warning, auto power-off and a fast sampling speed of 500MHz. A rechargeable Li-battery is provided with this cable fault locator enabling it to works continuously for 12 hours on a single charge.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: TDR Cable Fault Locator
Posted in GAO Instruments News | No Comments »
August 20th, 2010
Toronto, Canada – GAO Instruments recommends its transmission performance analyzer which is used for measuring the error rate of data communication and for the analysis of line faults and their causes. It is suitable for parameter measurement and routine maintenance testing of 2M systems and N×64K communication channels. This analyzer supports multi-task operation and performs background tests allowing users to review previous records.
This handheld digital transmission analyzer, model A0300005, can be used to test digital channels with 2Mbit/s interfaces, equi-directional 64kbit/s interfaces, or other interfaces such as V.24/V.28/RS232, V.35, V.36, RS449, X.21, RS485, EIA530, EIA530A. It stores as many as nine test settings and twenty groups of test results in its on-board memory to avoid data loss in the event of power failure. Test results can be transmitted to a computer for storage, analysis and printing. The handheld analyzer has an internal rechargeable battery which enables more than eight hours continuous operation.
For any sales inquires please contact:
1-877 585-9555 – Toll Free (USA & Canada)
1-416 292-0038 – All Other Areas
sales@gaoinstruments.com
Tags: transmission performance analyzer
Posted in GAO Instruments News | No Comments »
August 18th, 2010
Toronto, Canada – GAO Instruments recommends this high performance USB PC based oscilloscope with two 8 bit channels, 80MHz bandwidth, 250MSa/s sample rate, and 1MB sample memory buffer with an 250MHz eight-channels logic analyzer and an FFT spectrum analyzer. It is designed to use in the sciences, medicine, engineering and telecommunications as well as for the maintenance of electric equipment and laboratory work.
This USB PC based oscilloscope, model A0130005, provides innovative cross triggering so that logic analyzer channels can trigger the analog channels and vice versa. It provides continuously variable pre-/post-trigger view, variable threshold voltage on logic analyzer channels, external clock input, ruggedized inputs and fast screen update rates. High impedance probes, logic analyzer pod, chips, wires and software are included in the kit. The oscilloscope connects with a computer through the parallel or USB port to upload data and for later analysis and printing. In addition, its software can be upgraded via the Internet.
For any sales inquires please contact:
1-877 585-9555 ext. 601 – Toll Free (USA & Canada)
1-416 292-0038 ext. 601 – All Other Areas
sales@gaoinstruments.com
Tags: USB PC Based Oscilloscope
Posted in GAO Instruments News | No Comments »