Archive for November, 2010

Portable CATV Cable Fault Locator Utilizes Time Domain Reflection Technology

Sunday, November 28th, 2010

Toronto, Canada – GAO Instruments recommends its CATV cable fault locator. This CATV cable fault locator is able to automatically locate and indicate the distance to many kinds of RF cable faults such as short circuits, open circuits or high resistance points. It is widely used in testing underground cables to find impedance break points and locating and terminal impedance failures in HFC systems.

This CATV cable fault locator, model A0500007, applies Time Domain Reflection (TDR) technology and display it on its LCD screen. This locator accurately tests 25, 50, 75 and 100Ohm impedance cables with a length of up to 2km. This portable cable fault locator provides an intuitive electronic map relevant to the time domain picture so that faults can be detected easily. In addition, it can connect to a computer for file upload and data analysis.

For sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Handheld Fiber Optic Power Meter Features Automatic Calibration

Wednesday, November 24th, 2010

Toronto, Canada – GAO Instruments has released its handheld optic power meter, which is intended for absolute optic power and relative loss measurement. This power meter is an essential tool utilized in telecommunication and CATV maintenance as well as in fiber optics test labs.

This multi-functional power meter, model A0670007, operates at a high accuracy of Β±5% and offers an automatic calibration function. Calibrated wavelengths including 850, 980, 1300, 1310, 1490, and 1550nm are available. It displays optic power in mW, dB and dBm on its large, high resolution LCD screen. The meter consumes little power and provides more than 240 hours continuous operation with three 1.5V batteries. Due to its rugged design, the meter is dust and water resistant, Β Β the power meter is ideal for field use.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Transmission Performance Analyzer Designed For 2M Systems

Sunday, November 21st, 2010

Toronto, Canada – GAO Instruments recommends its transmission performance analyzer which is used for measuring the error rate of data communication and for the analysis of line faults and their causes. It is suitable for parameter measurement and routine maintenance testing of 2M systems and NΓ—64K communication channels. This analyzer supports multi-task operation and performs background tests allowing users to review previous records.

This handheld digital transmission analyzer, model A0300005, can be used to test digital channels with 2Mbit/s interfaces, equi-directional 64kbit/s interfaces, or other interfaces such as V.24/V.28/RS232, V.35, V.36, RS449, X.21, RS485, EIA530, EIA530A. It stores as many as nine test settings and twenty groups of test results in its on-board memory to avoid data loss in the event of power failure. Test results can be transmitted to a computer for storage, analysis and printing. The handheld analyzer has an internal rechargeable battery which enables more than eight hours continuous operation.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

High Performance USB PC Based Oscilloscope

Wednesday, November 17th, 2010

Toronto, Canada – GAO Instruments has announced the release of its USB PC based oscilloscope which is designed for the testing and maintenance of lines, electronic equipment and laboratory work in sciences, medicine, engineering, telecommunications and other industries.

This USB PC based oscilloscope, model A0130003, is compatible with USB 2.0 and requires no external power. It displays waveform average statistics, persistence, intensity, subtraction, and multiplication. The waveforms can be saved to text, MS Word or Excel, or graphic files (JPG or BMP). This versatile USB PC based oscilloscope with a 40MHz bandwidth operates under such operating systems as Windows98, Windows Me, Windows NT, Windows 2000, Windows XP and Vista. It offers three triggering modes – auto, normal and single for selection and has a maximum sample rate of 250MS/s.

For sales inquiries please contact:

1-877 585-9555 – Toll Free (USA & Canada)

1-416 292-0038 – All Other Areas

sales@gaoinstruments.com

E1/T1 BER Tester and Data Transmission Analyzer

Monday, November 15th, 2010

Toronto, Canada – GAO Instruments recommends its E1/T1 BER tester and data transmission analyzer which is intended for frame synchronization code monitoring, CRC4 monitoring, offline error testing, signal waveform analysis, IP PING testing, offline and online monitoring and ITU-T G.821, G.826, M.2100 error analysis.

This high performance E1/T1 BER tester and data transmission analyzer, model A0300001, performs error code testing at the rate of 50b/s to 2048kb/s. It offers 2M online monitoring, which can be used for routine maintenance, repair and operations monitoring for communication equipment. This tester integrates a special remote monitoring function to perform real time monitoring through software. It is powered by rechargeable lithium batteries. In addition, the BER tester and data transmission analyzer has a large capacity memory for data storage and is equipped with a large LCD screen.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Cost-effective USB PC Based Oscilloscope

Thursday, November 11th, 2010

Toronto, Canada – GAO Instruments recommends its cost-effective USB PC based oscilloscope , which is a high performance 8-bit, two-channel computer based USB digital storage oscilloscope. It is commonly used for the maintenance of electronic equipment and laboratory work in fields such as science, medicine, engineering and telecommunications.

The USB PC based oscilloscope, model A0130001, conducts PASS/FALL checks, waveform average, persistence, intensity, invert, addition, subtraction, multiplication, division, and X-Y plot. It saves waveforms in various formats including text, jpg/bmp graphic file, MS Excel/Word file. It runs under most Windows OS up to VISTA. The USB PC based oscilloscope can be connected to computer with a USB cable (included) for both data transfer and power supply as a replacement of external power supply. It combines the functions of an oscilloscope, spectrum analyzer, waveform recorder, signal generator, voltmeter and cymometer. The USB PC based oscilloscope operates at up to 100Ms/s real-time sampling rate at a bandwidth of 50MHz.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Multi-purpose Data Communication Tester

Wednesday, November 10th, 2010

Toronto, Canada – GAO Instruments recommends its multi-purpose and compact data communication tester. It is designed for the creation, maintenance and troubleshooting of digital networks and carrying out both framed and unframed tests on various equipment such as primary multiplexers, digital cross connects, automatic protection switches and circuits operating at a speed between 50bit/s and 2048kbit/s.

This data communication tester, model A0300002, integrates four data interfaces and G.703 Co-dir 64kbit/s and G.703-2Mkbit/s interface; accommodations for future interfaces have also been considered. It offers an error analysis function enabling easy display of histograms. This data communication tester also supports DTE and DCE emulation.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Arbitrary Waveform Generator and Frequency Counter with DDS Circuit

Sunday, November 7th, 2010

Toronto, Canada – GAO Instruments has released an arbitrary waveform generator and frequency counter which boasts DDS circuit to produce the corresponding DAC refreshing clock. It directly reads waveform data files produced by Tektronix oscilloscopes or Tektronix waveform editor software and displays the waveform. The waveform generator uses DDS technology so that it has advantages of high frequency accuracy, high waveform resolution, high reliability and wide software support.

This cost-effective USB waveform generator and frequency counter, model A0200002, is shipped with both SDK and API and can be easily integrated or embedded into other auto-measuring systems. It is integrated with one channel of arbitrary waveform output, 8 bit output, synchronized signal output and two input channels for counter/frequency measurement, 8 bit input and external trigger input. Users can arbitrarily edit the waveform using a mouse. Parameters such as amplitude, frequency and offset are configurable. Users can also choose regular waveforms including Sine, Square, Triangle, Saw-tooth, TTL, white Noise, GaussIian Noise, Trapezoid, Exponent, AM and FM are configurable. A computer transfers the waveform data into the memory of the signal generator via USB bus; the ID counter cycles and sends the periodic waveform data to the DAC circuits.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Handheld E1 Bit Error Rate (BER) Tester

Wednesday, November 3rd, 2010

Toronto, Canada – GAO Instruments is offering its easy-to-use E1 BER tester intended for R&D, production, installation and maintenance of SDH, PDH, PCM and DATA protocol conversion. It is an ideal device for fast problem resolution, E1 PCM line access, maintenance, check and acceptance testing.

This handheld E1 BER tester, model A0300020, features self-check and keyboard testing, extensive error and alarm generation, detection and indication. This tester with smart navigation mode has a large color LCD screen allowing test results to be displayed clearly. It offers full-featured measurements of E1, Datacom and Protocol Converter. Test results can downloaded or printed via included software. The embedded software is upgradeable via an integrated USB interface. This low-power consumption tester offers alarms and indications for signal loss, AIS, frame loss, MFrame loss, pattern loss, remote alarm, errors, low battery.

For sales inquiries please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com

Handheld Optical Light Source

Tuesday, November 2nd, 2010

Toronto, Canada – GAO Instruments recommends this advanced handheld optical light source specially designed for the installation, construction and maintenance of fiber optics as well as telecommunication and CATV networks.

This handheld optical light source, model A0630005, offers exceptional stability and insensitivity to ambient temperature variations. It boasts a highly stable output power and adjustable frequency. Its wavelength and modulation are selected simply by pushing buttons on the front panel. A universal 2.5mm adaptor is provided for power supply while FC, SC, ST interchangeable connectors are optional. Featuring a large backlit LCD display, simple operation and compact size, this optical light source is a perfect choice for field use.

For sales inquires please contact:

1-877 585-9555 ext. 601 – Toll Free (USA & Canada)

1-416 292-0038 ext. 601 – All Other Areas

sales@gaoinstruments.com